6產品
石油和天然氣工業
Oil and gas maintenance relies on heavy-duty air impact wrenches for flange bolting, pipeline work and plant turnarounds. Soartec supplies 3/4" to 1-1/2" D-handle impact wrenches from 1,900 to 4,100 ft-lb, including ATEX-certified explosion-proof (EX) versions for hazardous work areas.
What oil and gas work demands
- Large flange bolts: pipelines, wellheads and process equipment use large-diameter bolts that need high torque to remove and run down.
- Hazardous areas: pneumatic tools have no electric motor, which is one reason they are widely used on oil and gas sites. Work in classified hazardous zones still requires tools rated for that zone.
- Turnaround speed: shutdowns are scheduled tightly, so crews need tools that loosen hundreds of bolts quickly and reliably.
Recommended tools by task
| Task | Tool | Soartec models |
|---|---|---|
| Small to mid-size flange bolts | 3/4" D-handle impact wrench, pinless hammer | WS-2106P (1,900 ft-lb) |
| Pipeline and process equipment flanges | 1" D-handle impact wrench, pinless hammer | WS-212P-2 (3,300 ft-lb), WS-215P-2 (2,500 ft-lb), WS-216P (2,500 ft-lb) |
| Largest flange and structural bolts | 1-1/2" D-handle impact wrench | WS-220-8 (3,750 ft-lb) |
| Work in hazardous areas | ATEX-certified explosion-proof (EX) impact wrench | WS-220EX (4,100 ft-lb) and the full explosion-proof range |
FAQ
What impact wrench is used for flange bolting?
Most flange work uses a 1" D-handle impact wrench in the 2,500–3,300 ft-lb range. The largest flanges call for 1-1/2" drive.
Are air tools safe in explosive atmospheres?
Air tools remove the electric motor as an ignition source, but hazardous zones still require tools rated for that zone. Choose an ATEX-certified explosion-proof (EX) model and confirm its zone rating with our team.
Do you supply tools for refinery turnarounds in volume?
Yes. As a manufacturer, Soartec supplies contractors and distributors with bulk and OEM orders.
Planning a turnaround or pipeline project? Request a quote for OEM and bulk pricing.
知識中心文章
-
Soartec® Industrial Tools Engineering TeamAir Ratchet vs Air Impact Wrench: Which One Do You Need?
-
Soartec® Industrial Tools Engineering TeamAir Shut-Off Screwdriver vs Impact Screwdriver: Which Should You Choose?
